Rug cleaning isn’t relatively as easy as following some simple guidelines. But if you follow these tips, your rugs will last longer and stay looking better for longer. Here is what you will need to have at hand to complete an effective rug cleaning job:
Rug Shampoo: You’ll want to make sure rugs are thoroughly cleaned of any soap residue. Soap residue can make your rugs feel heavy and sticky. Soak up the remaining soap with a bucket of warm water and rinse out the area rugs. If the spill is too large, make sure you have towels handy to prevent the stain from spreading.
Vacuum: For a spot-on clean, you should first vacuum the entire area using a vacuum. Then, if needed, use a damp sponge to remove excess soil from the carpet fibres. Next, work your way down the carpet, going from the top to the bottom. Do not leave rugs standing in water. If at all possible, wait until the area has dried before vacuuming it again.
Blotting Solution: To make sure the area looks as white as possible, blot the area with a white towel. Rubbing alcohol or lemon juice on the stain will help to make sure it doesn’t bleed or seep into the fibres. Blotting soap on a soft sponge works too. However, make sure the alcohol or juice is fragrance-free. A robust solution can be damaging to rugs.
Wool Detergent: For a more mild-smelling detergent, try using a natural fibres detergent. Wool detergents often contain natural fibres like manganese, which can cause problems when cleaning wool carpets. Synthetic fibres are much milder and work just as well.
Stain Removal: When there are deep-seated stains that you cannot get out by vacuuming alone, you may need to hire a professional to remove them. You can either pour a jug of the cleaner or apply it directly to the stain for these heavy-duty stains. Then, let the stain sit overnight and vacuum it the next day. You can repeat this process until the stain is gone. Or you can use a steam cleaner to remove stains from deep within the carpet. Steam cleaning services are usually reserved for stains that are deeper inside the carpet fibres.
Contact a local company to learn more about how to take care of your park ridge area rugs. They will be able to answer all your questions. If you decide to tackle the job on your own, make sure you follow instructions carefully. Vacuuming too deeply in areas or using the wrong vacuum cleaner could damage your rug or other items in the area. Also, if you are unsure how to handle a particular job, contact a local company for expert advice.
Professional area Rug Cleaning Adelaide will also advise you on spotting certain clean areas, like high traffic or sitting areas. Some people are afraid of spotting their carpets because they think they will bleed, but spotting the spots will cause a lighter colour to appear. If you are not careful, the stain will last longer. If you spot clean regularly, the stains should fade to a light brown or off completely.
Sometimes, the best way to clean a stain is to use a solution of vinegar and water and apply it with a sponge or rag to the spot. Then, blot the area with another piece of towel to remove the soap. You can then rinse it under the kitchen sink. To rinse it further, you can place a bowl of cold water over the rug using the garden hose. Then, add one cup of white vinegar and mix it thoroughly with the water. Finally, rinse it under the sink until the solution has completely evaporated.
However, if you have tough stains or are very dirty, you may need to invest in professional rug cleaning products. One of the best cleaning products for rugs is carpet shampoo, and these are often available at your local grocery store or department store. Look for those that are low-sussing and those that do not contain harsh chemicals. Also, look for a shampoo that does not contain petrochemicals or petroleum products.